SYSTEMS BASED ON LINEAR MOTORS

FOR HIGH DYNAMIC APPLICATIONS WITH EXCEPTIONAL PERFORMANCES

+ Frequencies up to 100 Hz in force or displacement control
+ Suitable for high dynamic loads: accelerations up to 10G
+ Maximum load up to 20 kN
+ Velocity up to 2.5 m/s
+ Up to 200 mm stroke

> Watch the Video

Systems based on linear motors

For high dynamic applications

General description

Linear axis based on linear motor for tests on materials and products. Suitable for tests in force and position control.

Advantages

  • High dynamic performance thanks to small moving masses (amax=40G)
  • Reduced maintenance thanks to the absence of a mechanical transmission
  • Efficient and very low power consumption thanks to the high efficiency of the electric motor and the absence of mechanical transmission
  • Wide range of use thanks to the wide range of velocity that can be managed from 0.01mm/s up to 2.000mm/s and 120mm of stroke
  • Simple installation thanks to the request of only one electric socket

Common application areas

  • Testing of materials, products and assembly processes
  • Cyclic tests (fatigue), static tests and tensile and compressive tests at high speed

Features

» CONTROL

  • Closed loop control of force and displacement by Test Center control system
  • Loop control and data acquisition up to 16 kHz
  • High resolution data acquisition (24 bit)

» FLEXIBLE USE

  • Possibility to install on any type of structure and support, alone or up to 8 controlled and synchronized axes
  • Variable installation positions
  • Controller in separate and free position
  • Flexible programming of test sequences by Test Center graphic interface
  • Ideal to use in clean room areas

» LARGE VARIETY OF STANDARD MODULES AND ACCESSORIES

  • Large variety of grips, special testing tools and load cells
  • Integration with extensometer and temperature chambers

TECHNICAL DATA

UD02UD04UD08UD015**UD020**
Max dynamic force[kN]2.4481216
Max static force[kN]1.52.557.510
Max test speed[mm/s]*20002000200012001000
Axis Length A
[mm]70095095013001300
Axis Width B
[mm]180200450450550
Axis Depth C
[mm]110120200250250
Length with piston D[mm]8001000140014001400
Standard stroke
[mm]*1006767100100
Working temperature[°C]5- 355 – 355 – 355 – 355 – 35

*Configurable on request   |   **Liquid-cooled engine

  • Load cell 0,1
  • Load cell 0,5
  • Load cell 1
  • Load cell 2,5
  • Load cell 5
  • Load cell 10
  • Load cell 25
  • Load cell 50
  • Load cell 100

* The standard accuracy class is 1 (ISO 376). The accuracy class 05 and 00 are available upon request.

  • Load cell 0,1
  • Load cell 0,5
  • Load cell 1
  • Load cell 2,5
  • Load cell 5
  • Load cell 10
  • Load cell 25
  • Load cell 50
  • Load cell 100

* The standard accuracy class is 1 (ISO 376). The accuracy class 05 and 00 are available upon request.