Electrodynamic actuators
with linear motors

FOR HIGH DYNAMIC APPLICATIONS WITH EXCEPTIONAL PERFORMANCES

> Frequencies up to 150 Hz in force or displacement control
> Suitable for high dynamic: accelerations up to 10g
> Maximum load up to 40 kN
> Velocity up to 2.0 m/s

Watch the videoDownload product brochure

Electrodynamic actuators with linear motor

FOR HIGH DYNAMIC APPLICATIONS WITH EXCEPTIONAL PERFORMANCES

  • HUD/HUDL Actuators

  • Up to 6 m/s and 45g
  • More info

For static and fatigue test

General description

Linear axis based on linear motor for tests on materials and products. Suitable for tests in force and position control.

  • Testing of materials, products and assembly processes
  • Cyclic tests (fatigue), static tests and tensile and compressive tests at high speed

Features

  • Closed loop control of force and displacement by Test Center control system
  • Loop control and data acquisition up to 16 kHz
  • High resolution data acquisition (24 bit)
  • Possibility to install on any type of structure and support, alone or up to 8 controlled and synchronized axes
  • Variable installation positions
  • Controller in separate and free position
  • Flexible programming of test sequences by Test Center graphic interface
  • Ideal to use in clean room areas
  • Large variety of grips, special testing tools and load cells
  • Integration with extensometer and temperature chambers

Advantages

High dynamic performance thanks to small moving masses

Reduced maintenance thanks to the absence of a mechanical transmission

Efficient and very low power consumption thanks to the high efficiency of the electric motor and the absence of mechanical transmission

Wide range of use thanks to the wide range of velocity that can be managed from 0.01mm/s up to 2.000mm/s and 100mm of stroke

Simple installation thanks to the request of only one electric socket

Video

Technical data

UD02UD04UD08UD010UD020UD030UD040
MAX. CONTINUATIVE DYNAMIC FORCE[kN]2.44.08.010.020.030.040.0
MAX. STATIC FORCE[kN]1.53.06.07.015.021.030.0
MAX. TEST SPEED[m/s]*2.02.02.01.01.01.01.0
MAX. TEST FREQUENCY[Hz]>125>125>125>100>100>100>100
ACTUATOR LENGTH A
[mm]700950950110011009001100
ACTUATOR DEPTH B
[mm]180280450530530530530
ACTUATOR WIDTH C
[mm]110140140230230230470
LENGTH WITH PISTON D[mm]800110011001250125010501250
STANDARD STROKE*
[mm]*100707070706070
COOLINGAirAirAirAirWaterWaterWater
WORKING TEMPERATURE[°C]5 – 355 – 355 – 355 – 355 – 355 – 355 – 35

*Configurable on request

Note: Specifications subject to change

HUD010 / HUD10LHUD020 / HUD020LHUD030 / HUD030LHUD040 / HUD040LXUD05XUD010XUD020XUD030
Max. Peak Load[kN]10.522.032.040.05.510.420.531.2
Max. Dynamic Force[kN]4.08.012.020.01.52.75.48.1
Max. Static Force[kN]3.06.08.014.01.02.14.26.3
Max. Test Speed
[m/s]4.0 / 8.04.0 / 8.04.0 / 8.02.0 / 4.06.06.06.06.0
Max. Speed at Peak Load
[m/s]1.75 / 4.01.75 / 4.01.75 / 4.01.0 / 2.04.04.04.04.0
Max. Test Frequency
[Hz]> 125> 125> 125> 100> 300> 300> 300> 300
Max. Acceleration (without load)[g]> 35> 40> 45> 30> 60> 80> 90> 90
Standard Stroke[mm]200200200250220220220220
CoolingAriaAriaAriaLiquidoAriaAriaAriaAria
Installed Electric Power[kW]15 / 3025 / 5535 / 8535 / 7010163045
Working Temperature[°C]5 – 355 – 355 – 355 – 355 – 355 – 355 – 355 – 35
.

*Configurable on request
Note: Specifications subject to change

BV015BV030BV050BV090BV140
Max. dynamic torque [Nm]11.020.035.065.0100.0
Max. static torque [Nm]15.030.050.090.0140.0
Max. test speed[rpm]400400300300300
Max. Number of Revolutions UnlimitedUnlimitedUnlimitedUnlimitedUnlimited
Rotational absolute encoder integratedIncludedIncludedIncludedIncludedIncluded
Available for electro-mechanical axisEA05 and greaterEA05 and greaterEA015 and greaterEA015 and greaterEA015 and greater
Available for electro-dynamic axisUD02 and greaterUD02 and greaterUD04 and greaterUD04 and greaterUD08 and greater

All the solutions is comprensive of biaxial load cell.
* Greater value upon request.
Note: Specifications subject to change


LOAD CELL

Load cell 0,1 Load cell 10
Load cell 0,5 Load cell 25
Load cell 1 Load cell 50
Lode cell 2,5 Load cell 100
Load cell 5

*The standard accuracy class is 1 (ISO 376). The accuracy class 05 and 00 are available upon request.

OTHER ACCESSORIES

  • Portal structure for large product testing
  • Two columns load frame
  • Extensometer for static tests
  • Control for two or more synchronized axes
  • Climatic chambers integrated in the structure and managed by Test Center
  • Remote control
  • Wedge jaws for test on flat specimens
  • Wedge jaws for testing cylindrical specimens
  • Customized grips for uniaxial testing of materials and products
  • Customized grips for multiaxial testing of materials and products

*Technical solutions for specific tests are available upon request

Download product brochure

Applications

4 axis with linear motor
UD04 Linear Motor
Linear motor machine with climatic chamber application
Grip accessories n.2
Linear motor
Shock absorbers testing machine
Shock absorbers detail
Electric linear motor
Load more
Load more

Are you interested in finding out what our electrodynamic actuators can do for you?

Fill out this form to send a request for a quote or for more information about the test system. We will be happy to answer you as soon as possible.

    Are you interested in finding out what our electrodynamic actuators can do for you?